• News

    Location:HOME > News Center > News

    Fastener material introduction

    Fasteners mainly carbon steel, stainless steel, copper, three kinds of materials, the most commonly used is carbon steel.
    Carbon steel is divided into carbon content of different: low carbon steel, medium carbon steel and high carbon steel and alloy steel.
    1, the low carbon steel (C% ≤ 0.25%) for the 4.8 major bolt and nut, 4 small screws without hardness requirements of the product.
    2, carbon steel (0.25%
    3, the high carbon steel (C%>0.45%), because of its high hardness, processing performance is not good, seldom use.
    4, the alloy steel: addition of alloying elements in plain carbon steel (such as Mn, Cr, Mo), add some special properties of steel.
    In general, class 8.8 bolts used 35 steel, 45 steel; 35CrMo with 10.9 grade bolt; 40Cr; 35CrMo with 12.9 bolts, 42CrMo.